# HG changeset patch
# User Dennis Fink <dennis.fink@c3l.lu>
# Date 2018-02-04 00:24:56
# Node ID 2a624ea601853e16c2e0650984af4dfa3031612e
# Parent  7fb8b2a3dfcff4f9c854976d7b106a1d19339408

Add version 0.1 and 0.2

diff --git a/Version_0_1.scad b/Version_0_1.scad
new file mode 100644
--- /dev/null
+++ b/Version_0_1.scad
@@ -0,0 +1,86 @@
+overall_outer_diameter = 75;
+overall_thickness = 15;
+
+neopixel_holder_thickness = 7.5;
+translucent_disk_thickness = overall_thickness - neopixel_holder_thickness;
+
+ring_24_outer_diameter = 65.6;
+ring_24_inner_diameter = 52.3;
+
+ring_12_outer_diameter = 36.8;
+ring_12_inner_diameter = 23.3;
+
+ring_thickness = 6.7;
+ring_z_offset = neopixel_holder_thickness - ring_thickness;
+
+channel_length = (ring_12_outer_diameter - ring_12_inner_diameter);
+channel_position = (-ring_12_outer_diameter - ring_12_inner_diameter)/2;
+
+cable_channel_width = (overall_outer_diameter/2 - ring_24_outer_diameter/2)/2;
+cable_channel_position = (-overall_outer_diameter/2) + cable_channel_width;
+
+alignment_pin_diameter = 2.5;
+alignment_pin_height = neopixel_holder_thickness - 2.5;
+alignment_pin_position = (-overall_outer_diameter/2) + alignment_pin_diameter;
+
+$fn = 200;
+
+module ring(h, od, id) {
+    difference() {
+        cylinder(h=h, d=od);
+        cylinder(h=h, d=id);
+    }
+};
+
+module channel() {    
+    translate([channel_position, -1.25, ring_z_offset])
+        cube([channel_length, 2.5, ring_thickness+1]);
+    
+    mirror([1, 0, 0])
+        translate([channel_position, -1.25, ring_z_offset])
+            cube([channel_length, 2.5, ring_thickness+1]);
+    
+    translate([cable_channel_position, 0, -1])
+        cylinder(h=neopixel_holder_thickness+2, d=2.5);
+    
+    translate([cable_channel_position, -1.25, ring_z_offset])
+        cube([cable_channel_width+0.1, 2.5, ring_thickness+0.1]);
+};
+
+module neopixel_holder() {
+    alignment_pin_z_position = neopixel_holder_thickness - alignment_pin_height;
+    
+    difference () {
+        
+        cylinder(h=neopixel_holder_thickness, d=overall_outer_diameter);
+        
+        for (d=[[ring_24_outer_diameter, ring_24_inner_diameter], [ring_12_outer_diameter, ring_12_inner_diameter]])
+            translate([0, 0, ring_z_offset])
+                ring(h=ring_thickness+1, od=d[0], id=d[1]);
+        
+        channel();
+        
+        translate([-alignment_pin_position, 0, alignment_pin_z_position])
+            cylinder(h=alignment_pin_height+0.1, d=alignment_pin_diameter);
+        
+        for (y=[alignment_pin_position, -alignment_pin_position])
+            translate([0, y, alignment_pin_z_position])
+                cylinder(h=alignment_pin_height+0.1, d=alignment_pin_diameter);
+    };
+
+};
+
+module translucent_disk() {
+    alignment_pin_diameter_l = alignment_pin_diameter - 0.1;
+    cylinder(h=translucent_disk_thickness, d=overall_outer_diameter);
+        
+    translate([-alignment_pin_position, 0, translucent_disk_thickness])
+        cylinder(h=alignment_pin_height, d=alignment_pin_diameter_l);
+        
+    for (y=[alignment_pin_position, -cable_channel_position])
+        translate([0, y, translucent_disk_thickness])
+            cylinder(h=alignment_pin_height, d=alignment_pin_diameter_l);
+};
+
+translate([-(overall_outer_diameter/2+1), 0, 0]) neopixel_holder();
+translate([(overall_outer_diameter/2+1), 0, 0]) rotate([180, 180, 0]) translucent_disk();
\ No newline at end of file
diff --git a/Version_0_2.scad b/Version_0_2.scad
new file mode 100644
--- /dev/null
+++ b/Version_0_2.scad
@@ -0,0 +1,72 @@
+overall_outer_diameter = 75;
+overall_thickness = 15;
+
+neopixel_holder_thickness = 7.5;
+translucent_disk_thickness = overall_thickness - neopixel_holder_thickness;
+
+ring_24_outer_diameter = 65.6;
+ring_24_inner_diameter = 52.3;
+
+ring_12_outer_diameter = 36.8;
+ring_12_inner_diameter = 23.3;
+
+ring_thickness = 6.7;
+ring_z_offset = neopixel_holder_thickness - ring_thickness;
+
+channel_length = overall_outer_diameter-3;
+
+alignment_pin_position = (-overall_outer_diameter/2) + 1.5; 
+
+$fn = 200;
+
+module ring(h, od, id) {
+    difference() {
+        cylinder(h=h, d=od);
+        cylinder(h=h, d=id);
+    }
+};
+
+module channel() {    
+    translate([-(channel_length/2), -2, ring_z_offset]) cube([channel_length, 4, ring_thickness+1]);
+    translate([0, 0, -1]) cylinder(h=neopixel_holder_thickness+2, d=10);
+};
+
+module neopixel_holder() {
+    
+    difference () {
+        
+        cylinder(h=neopixel_holder_thickness, d=overall_outer_diameter);
+        
+        for (d=[[ring_24_outer_diameter, ring_24_inner_diameter], [ring_12_outer_diameter, ring_12_inner_diameter]])
+            translate([0, 0, ring_z_offset])
+                ring(h=ring_thickness+1, od=d[0], id=d[1]);
+        
+        channel();
+        
+        for (y=[0, 1])
+            mirror([0, y, 0])
+                mirror([1, 1, 0])
+                    translate([alignment_pin_position, -2, ring_z_offset])
+                        cube([5, 4, ring_thickness+1]);
+           
+    };
+
+};
+
+module translucent_disk() {
+    cylinder(h=translucent_disk_thickness, d=overall_outer_diameter);
+    
+    
+    for (y=[0, 1])
+            mirror([0, y, 0])
+                mirror([1, 1, 0])
+                    translate([alignment_pin_position, -(4-0.2)/2, translucent_disk_thickness])
+                        cube([3, 4-0.2, neopixel_holder_thickness -ring_z_offset]);
+    for (x=[0, 1])
+        mirror([x, 0, 0])
+            translate([alignment_pin_position, -(4-0.2)/2, translucent_disk_thickness])
+                cube([3, 4-0.2, neopixel_holder_thickness -ring_z_offset]);
+};
+
+translate([-(overall_outer_diameter/2+1), 0, 0]) neopixel_holder();
+translate([(overall_outer_diameter/2+1), 0, 0]) translucent_disk();
\ No newline at end of file