Wearables/Neopixel-Respirator Changeset - be58095e6635 · Chaos Computer Club Lëtzebuerg Projects

Changeset - be58095e6635

Parent rev.

Child rev.

[Not reviewed]

h0.4v0.1 default

0 1 0

Dennis Fink - 8 years ago 2018-03-02 21:49:02
dennis.fink@c3l.lu

Use different cable channels and move alignment pins into own module

1 file changed with 16 insertions and 5 deletions:

3D_Models/Holder.scad

0 comments (0 inline, 0 general)

3D_Models/Holder.scad

➞

Show inline comments

 overall_outer_diameter = 75;
 overall_thickness = 15;
 neopixel_holder_thickness = 7.5;
 translucent_disk_thickness = overall_thickness - neopixel_holder_thickness;
 ring_24_outer_diameter = 65.6 + 0.5;
 ring_24_inner_diameter = 52.3 - 0.5;
 ring_12_outer_diameter = 36.8 + 0.5;
 ring_12_inner_diameter = 23.3 - 0.5;
 ring_thickness = 6.7;
 ring_z_offset = neopixel_holder_thickness - ring_thickness;
 channel_length = overall_outer_diameter-3;
 //channel_length = overall_outer_diameter-3;
 channel_length = ring_12_outer_diameter;
 alignment_pin_position = (-overall_outer_diameter/2) + 1.5;
 $fn = 200;
 module ring(h, od, id) {
     difference() {
         cylinder(h=h, d=od);
         cylinder(h=h, d=id);
+    }
 };
 module channel() {
     translate([-(channel_length/2), -2, ring_z_offset]) cube([channel_length, 4, ring_thickness+1]);
     translate([-(channel_length/2)-8, -2, ring_z_offset]) cube([channel_length+2, 4, ring_thickness+1]);
     rotate([0, 0, 37.5]) translate([15, -2, ring_z_offset]) cube([15, 4, ring_thickness+1]);
     rotate([0, 0, -37.5]) translate([15, -2, ring_z_offset]) cube([15, 4, ring_thickness+1]);
     translate([0, 0, -1]) cylinder(h=neopixel_holder_thickness+2, d=10);
 };
 module alignment_pin() {
     for (x=[0, 1])
       mirror([x, 0, 0])
         translate([alignment_pin_position, -(4-0.2)/2, ring_z_offset])
           cube([3, 4-0.2, neopixel_holder_thickness - ring_z_offset + 0.1]);
+}
 module neopixel_holder() {
     difference () {
         cylinder(h=neopixel_holder_thickness, d=overall_outer_diameter);
         for (d=[[ring_24_outer_diameter, ring_24_inner_diameter], [ring_12_outer_diameter, ring_12_inner_diameter]])
             translate([0, 0, ring_z_offset])
                 ring(h=ring_thickness+1, od=d[0], id=d[1]);
         channel();
         alignment_pin();
+    }
 };
 module translucent_disk() {
     cylinder(h=translucent_disk_thickness, d=overall_outer_diameter);
     for (x=[0, 1])
         mirror([x, 0, 0])
             translate([alignment_pin_position, -(4-0.2)/2, translucent_disk_thickness])
                 cube([3, 4-0.2, neopixel_holder_thickness -ring_z_offset]);
 };
 translate([-(overall_outer_diameter/2+1), 0, 0]) neopixel_holder();
 translate([(overall_outer_diameter/2+1), 0, 0]) translucent_disk();
@@ \ No newline at end of file @@
 neopixel_holder();
 // translate([-(overall_outer_diameter/2+1), 0, 0]) neopixel_holder();
 //translate([(overall_outer_diameter/2+1), 0, 0]) translucent_disk();

0 comments (0 inline, 0 general)