diff --git a/3D_Models/Version_0_2.scad b/3D_Models/Version_0_2.scad
deleted file mode 100644
--- a/3D_Models/Version_0_2.scad
+++ /dev/null
@@ -1,72 +0,0 @@
-overall_outer_diameter = 75;
-overall_thickness = 15;
-
-neopixel_holder_thickness = 7.5;
-translucent_disk_thickness = overall_thickness - neopixel_holder_thickness;
-
-ring_24_outer_diameter = 65.6;
-ring_24_inner_diameter = 52.3;
-
-ring_12_outer_diameter = 36.8;
-ring_12_inner_diameter = 23.3;
-
-ring_thickness = 6.7;
-ring_z_offset = neopixel_holder_thickness - ring_thickness;
-
-channel_length = overall_outer_diameter-3;
-
-alignment_pin_position = (-overall_outer_diameter/2) + 1.5; 
-
-$fn = 200;
-
-module ring(h, od, id) {
-    difference() {
-        cylinder(h=h, d=od);
-        cylinder(h=h, d=id);
-    }
-};
-
-module channel() {    
-    translate([-(channel_length/2), -2, ring_z_offset]) cube([channel_length, 4, ring_thickness+1]);
-    translate([0, 0, -1]) cylinder(h=neopixel_holder_thickness+2, d=10);
-};
-
-module neopixel_holder() {
-    
-    difference () {
-        
-        cylinder(h=neopixel_holder_thickness, d=overall_outer_diameter);
-        
-        for (d=[[ring_24_outer_diameter, ring_24_inner_diameter], [ring_12_outer_diameter, ring_12_inner_diameter]])
-            translate([0, 0, ring_z_offset])
-                ring(h=ring_thickness+1, od=d[0], id=d[1]);
-        
-        channel();
-        
-        for (y=[0, 1])
-            mirror([0, y, 0])
-                mirror([1, 1, 0])
-                    translate([alignment_pin_position, -2, ring_z_offset])
-                        cube([5, 4, ring_thickness+1]);
-           
-    };
-
-};
-
-module translucent_disk() {
-    cylinder(h=translucent_disk_thickness, d=overall_outer_diameter);
-    
-    
-    for (y=[0, 1])
-            mirror([0, y, 0])
-                mirror([1, 1, 0])
-                    translate([alignment_pin_position, -(4-0.2)/2, translucent_disk_thickness])
-                        cube([3, 4-0.2, neopixel_holder_thickness -ring_z_offset]);
-    for (x=[0, 1])
-        mirror([x, 0, 0])
-            translate([alignment_pin_position, -(4-0.2)/2, translucent_disk_thickness])
-                cube([3, 4-0.2, neopixel_holder_thickness -ring_z_offset]);
-};
-
-translate([-(overall_outer_diameter/2+1), 0, 0]) neopixel_holder();
-translate([(overall_outer_diameter/2+1), 0, 0]) translucent_disk();
\ No newline at end of file