-- This is an example site configuration for Gluon v2014.3.x
--
-- Take a look at the documentation located at
-- http://gluon.readthedocs.org/ for details.
--
-- This configuration will not work as it. You're required to make
-- community specific changes to it!
{
  -- Used for generated hostnames, e.g. freifunk-abcdef123456.
  hostname_prefix = 'fflux-',

  -- Name of the community.
  site_name = 'Freifunk Luxembourg',

  -- Shorthand of the community.
  site_code = 'fflux',

  -- 32 bytes of random data, encoded in hexadecimal
  -- This data must be unique among all sites and domains!
  -- Can be generated using: echo $(hexdump -v -n 32 -e '1/1 "%02x"' </dev/urandom)
  domain_seed = '20d0d9c09a27d488c1291da65fe4dd4971ff8631dba0195be15805dbad01f78e',

  -- Prefixes used within the mesh. Both are required.
  prefix4 = '10.24.128.0/18',
  prefix6 = 'fd4e:f2d7:88d2:fffe::/64',


  -- Timezone of your community.
  -- See http://wiki.openwrt.org/doc/uci/system#time.zones
  timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',

  -- List of NTP servers in your community.
  -- Must be reachable using IPv6!
  ntp_servers = {'fd4e:f2d7:88d2:fffe::11','fd4e:f2d7:88d2:fffe::12'},

  -- Wireless regulatory domain of your community.
  regdom = 'LU',

  -- Wireless configuratoin for 2.4 GHz interfaces.
  wifi24 = {
    -- Wireless channel.
    channel = 1,

	ap = {
	  ssid = 'luxembourg.freifunk.net',
	},
	mesh = {
	  id = 'freifunk-mesh',
	  mcast_rate = 12000,
	},

  },

  -- Wireless configuration for 5 GHz interfaces.
  -- This should be equal to the 2.4 GHz variant, except
  -- for channel and htmode.
  wifi5 = {
    channel = 36;
	ap = {
	  ssid = 'luxembourg.freifunk.net',
	},
	mesh = {
	  id = 'freifunk-mesh',
	  mcast_rate = 12000,
	},
  },


  mesh = {
    vxlan = true,
  },

  -- The next node feature allows clients to always reach the node it is
  -- connected to using a known IP address.
  next_node = {
    -- anycast IPs of all nodes
    ip4 = '10.24.128.1',
    ip6 = 'fd4e:f2d7:88d2:fffe::1',

    -- anycast MAC of all nodes
    mac = '32:3d:f9:8f:01:53',
  },

  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
  -- what these options do.
  mesh_vpn = {
    enabled = true,
    mtu = 1406,
   fastd = {
    configurable = true,
    -- List of crypto-methods to use.
    methods = {'salsa2012+umac'},
    groups = {
      backbone = {
        -- Limit number of connected peers to reduce bandwidth.
        limit = 1,

        -- List of peers.
        peers = {
      gw2= {
	    key = '2797c078ab5176ec27951cbe9d685e3212320217042494a37d8252fcb1a3029c',
	    remotes = {'ipv4 "fflux-gw2.c3l.lu" port 10000'},
      },
	  gw3= {
	    key = '8e15baeaca68163c60fe97292cb4268616e16710d51f9d4605cd70c00ad0c7eb',
	    remotes = {'ipv4 "fflux-gw3.c3l.lu" port 10000'},
	  }
        },
      },
    },
   },
  },

  autoupdater = {
    enabled = true,
    -- Default branch. Don't forget to set GLUON_BRANCH when building!
    branch = 'stable',

    -- List of branches. You may define multiple branches.
    branches = {
      stable = {
        name = 'stable',

        -- List of mirrors to fetch images from. IPv6 required!
        mirrors = {
	        'http://[fd4e:f2d7:88d2:fffe::12]/firmware/stable/sysupgrade',
            'http://[fd4e:f2d7:88d2:fffe::13]/firmware/stable/sysupgrade',
	        'http://firmware.freifunk.lu/stable/sysupgrade',
        },

        -- Number of good signatures required.
        -- Have multiple maintainers sign your build and only
        -- accept it when a sufficient number of them have
        -- signed it.
        good_signatures = 1,

        -- List of public keys of maintainers.
        pubkeys = {
            '4da854e34689c428c9a71e3022c598e88134bce859ae385c1f38e9131d3e9cb5', -- sid
            '0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgames
            '6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fanta
        },
      },

      beta = {
        name = 'beta',

        -- List of mirrors to fetch images from. IPv6 required!
        mirrors = {
            'http://[fd4e:f2d7:88d2:fffe::12]/firmware/beta/sysupgrade',
            'http://[fd4e:f2d7:88d2:fffe::13]/firmware/beta/sysupgrade',
            'http://firmware.freifunk.lu/beta/sysupgrade',
        },

        -- Number of good signatures required.
        -- Have multiple maintainers sign your build and only
        -- accept it when a sufficient number of them have
        -- signed it.
        good_signatures = 1,

        -- List of public keys of maintainers.
        pubkeys = {
		    '4da854e34689c428c9a71e3022c598e88134bce859ae385c1f38e9131d3e9cb5', -- sid
            '0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgames
            '6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fanta

        },
      },

      experimental = {
        name = 'experimental',

        -- List of mirrors to fetch images from. IPv6 required!
        mirrors = {
            'http://[fd4e:f2d7:88d2:fffe::12]/firmware/experimental/sysupgrade',
            'http://[fd4e:f2d7:88d2:fffe::13]/firmware/experimental/sysupgrade',
            'http://firmware.freifunk.lu/experimental/sysupgrade',
        },

        -- Number of good signatures required.
        -- Have multiple maintainers sign your build and only
        -- accept it when a sufficient number of them have
        -- signed it.
        good_signatures = 1,

        -- List of public keys of maintainers.
        pubkeys = {
		    '4da854e34689c428c9a71e3022c598e88134bce859ae385c1f38e9131d3e9cb5', -- sid
		    '0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgames
		    '6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fanta
        },
      },

    },
  },

  bandwidth_limit = {
      -- The bandwidth limit can be enabled by default here.
      enabled = false,

      -- Default upload limit (kbit/s).
      egress = 200,

      -- Default download limit (kbit/s).
      ingress = 3000,
    },

  ssid_changer = {
  switch_timeframe = 5,  -- only once every timeframe (in minutes) the SSID will change to the Offline-SSID
                          -- set to 1440 to change once a day
                          -- set to 1 minute to change every time the router gets offline
  first = 5,              -- the first few minutes directly after reboot within which an Offline-SSID always may be activated (must be <= switch_timeframe)
  prefix = 'FF_Offline_', -- use something short to leave space for the nodename (no '~' allowed!)
  suffix = 'nodename',    -- generate the SSID with either 'nodename', 'mac' or to use only the prefix: 'none'
  
  tq_limit_enabled = false,   -- if false, the offline SSID will only be set if there is no gateway reacheable
                          -- upper and lower limit to turn the offline_ssid on and off
                          -- in-between these two values the SSID will never be changed to prevent it from toggeling every minute.
  tq_limit_max = '45',    -- upper limit, above that the online SSID will be used
  tq_limit_min = '30'     -- lower limit, below that the offline SSID will be used
},
}