Files
@ c663aeea25a2
Branch filter:
Location: freifunk/Firmware-building/site_config/experimental/site/image-customization.lua - annotation
c663aeea25a2
1.5 KiB
text/x-lua
experimental: v2023.2.5 for 2025_08_22
This update required bigger changes: moving information from "site.mk"
to a new file called "image-customization.lua".
I do not like the x86-specific packages, but I kept them as nobody told
me if they were needed or not.
This update required bigger changes: moving information from "site.mk"
to a new file called "image-customization.lua".
I do not like the x86-specific packages, but I kept them as nobody told
me if they were needed or not.
c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 c663aeea25a2 | features {
'autoupdater',
'ebtables-filter-multicast',
'ebtables-filter-ra-dhcp',
'ebtables-limit-arp',
'mesh-batman-adv-15',
'mesh-vpn-fastd',
'respondd',
'status-page',
'web-advanced',
'wireless-encryption-wpa3',
'web-wizard',
}
packages {
'gluon-mesh-batman-adv-15',
'gluon-autoupdater',
'gluon-config-mode-autoupdater',
'gluon-config-mode-hostname',
'gluon-config-mode-mesh-vpn',
'gluon-config-mode-geo-location',
'gluon-config-mode-contact-info',
'gluon-config-mode-core',
'gluon-ebtables-filter-multicast',
'gluon-ebtables-filter-ra-dhcp',
'gluon-web-admin',
'gluon-web-autoupdater',
'gluon-web-wifi-config',
'gluon-web-private-wifi',
'gluon-mesh-vpn-fastd',
'gluon-radvd',
'gluon-respondd',
'gluon-setup-mode',
'gluon-status-page',
'gluon-ssid-changer',
'respondd-module-airtime',
'iwinfo',
}
-- this is legacy and was ported over from the previous file
-- unsure if needed or has any use
usb_x86_generic_network_modules = {
'kmod-usb-ohci-pci',
'kmod-sky2',
'kmod-atl2',
'kmod-igb',
'kmod-3c59x',
'kmod-e100',
'kmod-e1000',
'kmod-e1000e',
'kmod-natsemi',
'kmod-ne2k-pci',
'kmod-pcnet32',
'kmod-8139too',
'kmod-r8169',
'kmod-sis900',
'kmod-tg3',
'kmod-via-rhine',
'kmod-via-velocity',
'kmod-forcedeth',
'kmod-iwlwifi',
}
if target('x86', '64') or target('x86', 'generic') then
packages(usb_x86_generic_network_modules)
end
|