-- usually you don't want users to connect to this mesh-SSID,

			-- so use a cryptic id that no one will accidentally mistake for the client WiFi

			id = 'freifunk-mesh',

			mcast_rate = 12000,

		},

	},

	-- Wireless configuration for 5 GHz interfaces.

	-- This should be equal to the 2.4 GHz variant, except

	-- for channel and htmode.

	wifi5 = {

		channel = 36;

		ap = {

			ssid = 'luxembourg.freifunk.net',

		},

		mesh = {

			id = 'freifunk-mesh',

			mcast_rate = 12000,

		},

	},

	mesh = {

		vxlan = true,

		batman_adv = {

			routing_algo = 'BATMAN_IV',

		},

	},

	-- The next node feature allows clients to always reach the node it is

	-- connected to using a known IP address.

	next_node = {

		-- anycast IPs of all nodes

		ip4 = '10.24.128.1',

		ip6 = 'fd4e:f2d7:88d2:fffe::1',

		-- anycast MAC of all nodes

		mac = '32:3d:f9:8f:01:53',

	},

	mesh_vpn = {

		enabled = true,

		fastd = {

			-- Refer to https://fastd.readthedocs.io/en/latest/ to better understand

			-- what these options do.

			-- List of crypto-methods to use.

			methods = {'salsa2012+umac'},

			mtu = 1406,

			configurable = true,

			groups = {

				backbone = {

					-- Limit number of connected peers to reduce bandwidth.

					limit = 1,

					-- List of peers.

					peers = {

						gw1 = {

							key = 'd5af753220451b6c181cca469835da9c67d3ca9603465e13a5adb9b64f89f3c6',

							remotes = {'ipv4 "fflux-gw1.freifunk.lu" port 10000'},

						},

						gw2 = {

							key = '3c42a77d863cb0475ec5a9e9b9c63ff557f8bac991b78a26427f100cc130462b',

							remotes = {'ipv4 "fflux-gw2.freifunk.lu" port 10000'},

						},

						test = {

							key = '95b22943135927cc1da6800ba152819ae5ee26cbb83d6354bc81a5ce632fcb5a',

							remotes = {'ipv4 "fflux-test.freifunk.lu" port 10000'},

						},

					},

				},

			},

		},

		bandwidth_limit = {

			-- preset can be enabled by default here

			enabled = false,

			-- in kbit/s

			egress = 2560, -- 2 Mbit/

			ingress = 10240, -- 10 Mbit/s

		},

	},

	autoupdater = {

		-- Set GLUON_AUTOUPDATER_ENABLED to enable the autoupdater by default for newly installed nodes.

		enabled = true,

		-- Default branch (optional), can be overridden by setting GLUON_AUTOUPDATER_BRANCH when building.

		branch = 'stable',

		branches = {

			stable = {

				name = 'stable',

				-- List of mirrors to fetch images from. IPv6 required!

				mirrors = {

					'http://[fd4e:f2d7:88d2:fffe::11]/stable/sysupgrade',

					'http://[fd4e:f2d7:88d2:fffe::12]/stable/sysupgrade',

					'http://[fd4e:f2d7:88d2:fffe::19]/stable/sysupgrade',

					'http://firmware.freifunk.lu/stable/sysupgrade',

				},

				good_signatures = 1,

				pubkeys = {

						'22e564fd31849637738ab5881469ea51cd4afd181c444244eb8a8ee04df40fef', -- orimpe

						'45c0d4a3d60c03f81ea75dd887474d99b29cd541f30807465e01de6c1b721b54', -- xbr

						'0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgamer

						'6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fantawams

				},

			},

			beta = {

				name = 'beta',

				-- List of mirrors to fetch images from. IPv6 required!

				mirrors = {

					'http://[fd4e:f2d7:88d2:fffe::11]/beta/sysupgrade',

					'http://[fd4e:f2d7:88d2:fffe::12]/beta/sysupgrade',

					'http://[fd4e:f2d7:88d2:fffe::19]/beta/sysupgrade',

					'http://firmware.freifunk.lu/beta/sysupgrade',

				},

				good_signatures = 1,

				pubkeys = {

					'22e564fd31849637738ab5881469ea51cd4afd181c444244eb8a8ee04df40fef', -- orimpe

					'45c0d4a3d60c03f81ea75dd887474d99b29cd541f30807465e01de6c1b721b54', -- xbr

					'0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgamer

					'6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fantawams

				},

			},

			experimental = {

				name = 'experimental',

				-- List of mirrors to fetch images from. IPv6 required!

				mirrors = {

					'http://[fd4e:f2d7:88d2:fffe::11]/experimental/sysupgrade',

					'http://[fd4e:f2d7:88d2:fffe::12]/experimental/sysupgrade',

					'http://[fd4e:f2d7:88d2:fffe::19]/experimental/sysupgrade',

					'http://firmware.freifunk.lu/experimental/sysupgrade',

				},

				good_signatures = 1,

				pubkeys = {

						'22e564fd31849637738ab5881469ea51cd4afd181c444244eb8a8ee04df40fef', -- orimpe

						'45c0d4a3d60c03f81ea75dd887474d99b29cd541f30807465e01de6c1b721b54', -- xbr

						'0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgamer

						'6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fantawams

				},

			},

		},

	},

	ssid_changer = {

		switch_timeframe = 5,  -- only once every timeframe (in minutes) the SSID will change to the Offline-SSID

									-- set to 1440 to change once a day

									-- set to 1 minute to change every time the router gets offline

		first = 5,              -- the first few minutes directly after reboot within which an Offline-SSID always may be activated (must be <= switch_timeframe)

		prefix = 'FF_Offline_', -- use something short to leave space for the nodename (no '~' allowed!)

		suffix = 'nodename',    -- generate the SSID with either 'nodename', 'mac' or to use only the prefix: 'none'

		tq_limit_enabled = false,   -- if false, the offline SSID will only be set if there is no gateway reacheable

											-- upper and lower limit to turn the offline_ssid on and off

												-- in-between these two values the SSID will never be changed to prevent it from toggeling every minute.

		tq_limit_max = '45',    -- upper limit, above that the online SSID will be used

		tq_limit_min = '30'     -- lower limit, below that the offline SSID will be used

	},

}