freifunk/Firmware-building Changeset - 9238ae727baf · Chaos Computer Club Lëtzebuerg Projects

Changeset - 9238ae727baf

Parent rev.

Child rev.

[Not reviewed]

0 4 0

Max Wahl (Fantawams) - 2 years ago 2022-10-25 19:15:27
fantawams@c3l.lu

Updated site config for stable, beta and experimental for Gluon 2021.1.2

4 files changed with 19 insertions and 7 deletions:

site_config/beta/site/site.mk

site_config/experimental/site/site.mk

site_config/stable/site/site.conf

site_config/stable/site/site.mk

0 comments (0 inline, 0 general)

site_config/beta/site/site.mk

➞

Show inline comments

@@ @@ -52,13 +52,13 @@ GLUON_SITE_PACKAGES := \ @@
 ##	DEFAULT_GLUON_RELEASE
 #		version string to use for images
 #		gluon relies on
 #			opkg compare-versions "$1" '>>' "$2"
 #		to decide if a version is newer or not.
 #DEFAULT_GLUON_RELEASE := sid~exp$(shell date '+%Y%m%d')
-DEFAULT_GLUON_RELEASE := 2021.1.1.1~beta20220218
+DEFAULT_GLUON_RELEASE := 2021.1.2.1~beta20220507
 ##	GLUON_RELEASE
 #		call make with custom GLUON_RELEASE flag, to use your own release version scheme.
 #		e.g.:
 #			$ make images GLUON_RELEASE=23.42+5

site_config/experimental/site/site.mk

➞

Show inline comments

@@ @@ -52,13 +52,13 @@ GLUON_SITE_PACKAGES := \ @@
 ##	DEFAULT_GLUON_RELEASE
 #		version string to use for images
 #		gluon relies on
 #			opkg compare-versions "$1" '>>' "$2"
 #		to decide if a version is newer or not.
 #DEFAULT_GLUON_RELEASE := sid~exp$(shell date '+%Y%m%d')
-DEFAULT_GLUON_RELEASE := 2021.1.1.1~exp20220216
+DEFAULT_GLUON_RELEASE := 2021.1.2.1~exp20220505
 ##	GLUON_RELEASE
 #		call make with custom GLUON_RELEASE flag, to use your own release version scheme.
 #		e.g.:
 #			$ make images GLUON_RELEASE=23.42+5

site_config/stable/site/site.conf

➞

Show inline comments

@@ @@ -28,13 +28,13 @@ @@
   -- Timezone of your community.
   -- See http://wiki.openwrt.org/doc/uci/system#time.zones
   timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
   -- List of NTP servers in your community.
   -- Must be reachable using IPv6!
   ntp_servers = {'fd4e:f2d7:88d2:fffe::11','fd4e:f2d7:88d2:fffe::12'},
+  ntp_servers = {'fd4e:f2d7:88d2:fffe::11','fd4e:f2d7:88d2:fffe::12','fd4e:f2d7:88d2:fffe::19'},
   -- Wireless regulatory domain of your community.
   regdom = 'LU',
   -- Wireless configuratoin for 2.4 GHz interfaces.
   wifi24 = {
@@ @@ -103,13 +103,17 @@ @@
             key = 'd5af753220451b6c181cca469835da9c67d3ca9603465e13a5adb9b64f89f3c6',
             remotes = {'ipv4 "fflux-gw1.freifunk.lu" port 10000'},
           },
           gw2 = {
             key = '3c42a77d863cb0475ec5a9e9b9c63ff557f8bac991b78a26427f100cc130462b',
             remotes = {'ipv4 "fflux-gw2.freifunk.lu" port 10000'},
+	  }
           },
           test = {
             key = '95b22943135927cc1da6800ba152819ae5ee26cbb83d6354bc81a5ce632fcb5a',
             remotes = {'ipv4 "fflux-test.freifunk.lu" port 10000'},
           },
         },
       },
     },
    },
   },
@@ @@ -124,12 +128,13 @@ @@
         name = 'stable',
         -- List of mirrors to fetch images from. IPv6 required!
         mirrors = {
 	        'http://[fd4e:f2d7:88d2:fffe::11]/stable/sysupgrade',
                 'http://[fd4e:f2d7:88d2:fffe::12]/stable/sysupgrade',
 		'http://[fd4e:f2d7:88d2:fffe::19]/stable/sysupgrade',
 	        'http://firmware.freifunk.lu/stable/sysupgrade',
         },
         -- Number of good signatures required.
         -- Have multiple maintainers sign your build and only
         -- accept it when a sufficient number of them have
@@ @@ -149,12 +154,13 @@ @@
         name = 'beta',
         -- List of mirrors to fetch images from. IPv6 required!
         mirrors = {
 		'http://[fd4e:f2d7:88d2:fffe::11]/beta/sysupgrade',
 		'http://[fd4e:f2d7:88d2:fffe::12]/beta/sysupgrade',
 		'http://[fd4e:f2d7:88d2:fffe::19]/beta/sysupgrade',
 		'http://firmware.freifunk.lu/beta/sysupgrade',
         },
         -- Number of good signatures required.
         -- Have multiple maintainers sign your build and only
         -- accept it when a sufficient number of them have
@@ @@ -174,12 +180,13 @@ @@
         name = 'experimental',
         -- List of mirrors to fetch images from. IPv6 required!
         mirrors = {
 		'http://[fd4e:f2d7:88d2:fffe::11]/experimental/sysupgrade',
 		'http://[fd4e:f2d7:88d2:fffe::12]/experimental/sysupgrade',
 		'http://[fd4e:f2d7:88d2:fffe::19]/experimental/sysupgrade',
 		'http://firmware.freifunk.lu/experimental/sysupgrade',
         },
         -- Number of good signatures required.
         -- Have multiple maintainers sign your build and only
         -- accept it when a sufficient number of them have

site_config/stable/site/site.mk

➞

Show inline comments

@@ @@ -52,13 +52,13 @@ GLUON_SITE_PACKAGES := \ @@
 ##	DEFAULT_GLUON_RELEASE
 #		version string to use for images
 #		gluon relies on
 #			opkg compare-versions "$1" '>>' "$2"
 #		to decide if a version is newer or not.
 #DEFAULT_GLUON_RELEASE := sid~exp$(shell date '+%Y%m%d')
-DEFAULT_GLUON_RELEASE := 2020.2.3~stable202108
+DEFAULT_GLUON_RELEASE := 2021.1.2~stable202205
 ##	GLUON_RELEASE
 #		call make with custom GLUON_RELEASE flag, to use your own release version scheme.
 #		e.g.:
 #			$ make images GLUON_RELEASE=23.42+5
@@ @@ -67,20 +67,25 @@ DEFAULT_GLUON_RELEASE := 2020.2.3~stable202108 @@
 # Allow overriding the release number from the command line
 GLUON_RELEASE ?= $(DEFAULT_GLUON_RELEASE)
 # Default priority for updates.
 GLUON_PRIORITY ?= 0
 GLUON_BRANCH ?= stable
 # Firmware branch and autoupdater config
 GLUON_AUTOUPDATER_BRANCH ?= stable
 GLUON_AUTOUPDATER_ENABLED ?= 1
 # set mesh mode for ath10k to 802.11s
 GLUON_ATH10K_MESH ?= 11s
 # Languages to include
 GLUON_LANGS ?= en
+GLUON_LANGS ?= de en
 # define a region for specific devices like TP-Link Archer C7
 GLUON_REGION := eu
 USB_X86_GENERIC_NETWORK_MODULES := \
 		kmod-usb-ohci-pci \
 		kmod-sky2 \
 		kmod-atl2 \

0 comments (0 inline, 0 general)