##	gluon site.mk makefile example

##      GLUON_FEATURES

#               Specify Gluon features/packages to enable;

#               Gluon will automatically enable a set of packages

#               depending on the combination of features listed

GLUON_FEATURES := \

        autoupdater \

        ebtables-filter-multicast \

        ebtables-filter-ra-dhcp \

        ebtables-limit-arp \

        mesh-batman-adv-15 \

        mesh-vpn-fastd \

        respondd \

        status-page \

        web-advanced \

	wireless-encryption-wpa3 \

        web-wizard

##	GLUON_SITE_PACKAGES

#		specify gluon/openwrt packages to include here

#               The gluon-mesh-batman-adv-* package must come first because of the dependency resolution

GLUON_SITE_PACKAGES := \

		gluon-mesh-batman-adv-15 \

		gluon-autoupdater \

		gluon-config-mode-autoupdater \

		gluon-config-mode-hostname \

		gluon-config-mode-mesh-vpn \

		gluon-config-mode-geo-location \

		gluon-config-mode-contact-info \

		gluon-config-mode-core \

		gluon-ebtables-filter-multicast \

		gluon-ebtables-filter-ra-dhcp \

		gluon-web-admin \

		gluon-web-autoupdater \

		gluon-web-wifi-config \

		gluon-web-private-wifi \

		gluon-mesh-vpn-fastd \

		gluon-radvd \

		gluon-respondd \

	        gluon-setup-mode \

		gluon-status-page \

		gluon-ssid-changer \

		respondd-module-airtime \

		iwinfo \

		iptables \

##	DEFAULT_GLUON_RELEASE

#		version string to use for images

#		gluon relies on

#			opkg compare-versions "$1" '>>' "$2"

#		to decide if a version is newer or not.

#DEFAULT_GLUON_RELEASE := sid~exp$(shell date '+%Y%m%d')

##	GLUON_RELEASE

#		call make with custom GLUON_RELEASE flag, to use your own release version scheme.

#		e.g.:

#			$ make images GLUON_RELEASE=23.42+5

#		would generate images named like this:

#			gluon-ff%site_code%-23.42+5-%router_model%.bin

# Allow overriding the release number from the command line

GLUON_RELEASE ?= $(DEFAULT_GLUON_RELEASE)

# Default priority for updates.

GLUON_PRIORITY ?= 0

# Firmware branch and autoupdater config

GLUON_AUTOUPDATER_BRANCH ?= beta

GLUON_AUTOUPDATER_ENABLED ?= 1

# set mesh mode for ath10k to 802.11s

GLUON_ATH10K_MESH ?= 11s

# Languages to include

GLUON_LANGS ?= de en

# define a region for specific devices like TP-Link Archer C7

GLUON_REGION := eu

USB_X86_GENERIC_NETWORK_MODULES := \

		kmod-usb-ohci-pci \

		kmod-sky2 \

		kmod-atl2 \

		kmod-igb \

		kmod-3c59x \

		kmod-e100 \

		kmod-e1000 \

		kmod-e1000e \

		kmod-natsemi \

		kmod-ne2k-pci \

		kmod-pcnet32 \

		kmod-8139too \

		kmod-r8169 \

		kmod-sis900 \

		kmod-tg3 \

		kmod-via-rhine \

		kmod-via-velocity \

		kmod-forcedeth \

		kmod-iwlwifi

ifeq ($(GLUON_TARGET),x86-generic)

		GLUON_SITE_PACKAGES += \

	$(USB_X86_GENERIC_NETWORK_MODULES)

endif

ifeq ($(GLUON_TARGET),x86-64)

              GLUON_SITE_PACKAGES += \

       $(USB_X86_GENERIC_NETWORK_MODULES)

endif

# Do not build images for deprecated devices

GLUON_DEPRECATED ?= 0

##	gluon site.mk makefile example

##      GLUON_FEATURES

#               Specify Gluon features/packages to enable;

#               Gluon will automatically enable a set of packages

#               depending on the combination of features listed

GLUON_FEATURES := \

        autoupdater \

        ebtables-filter-multicast \

        ebtables-filter-ra-dhcp \

        ebtables-limit-arp \

        mesh-batman-adv-15 \

        mesh-vpn-fastd \

        respondd \

        status-page \

        web-advanced \

	wireless-encryption-wpa3 \

        web-wizard

##	GLUON_SITE_PACKAGES

#		specify gluon/openwrt packages to include here

#               The gluon-mesh-batman-adv-* package must come first because of the dependency resolution

GLUON_SITE_PACKAGES := \

		gluon-mesh-batman-adv-15 \

		gluon-autoupdater \

		gluon-config-mode-autoupdater \

		gluon-config-mode-hostname \

		gluon-config-mode-mesh-vpn \

		gluon-config-mode-geo-location \

		gluon-config-mode-contact-info \

		gluon-config-mode-core \

		gluon-ebtables-filter-multicast \

		gluon-ebtables-filter-ra-dhcp \

		gluon-web-admin \

		gluon-web-autoupdater \

		gluon-web-wifi-config \

		gluon-web-private-wifi \

		gluon-mesh-vpn-fastd \

		gluon-radvd \

		gluon-respondd \

	        gluon-setup-mode \

		gluon-status-page \

		gluon-ssid-changer \

		respondd-module-airtime \

		iwinfo \

		iptables \

##	DEFAULT_GLUON_RELEASE

#		version string to use for images

#		gluon relies on

#			opkg compare-versions "$1" '>>' "$2"

#		to decide if a version is newer or not.

#DEFAULT_GLUON_RELEASE := sid~exp$(shell date '+%Y%m%d')

##	GLUON_RELEASE

#		call make with custom GLUON_RELEASE flag, to use your own release version scheme.

#		e.g.:

#			$ make images GLUON_RELEASE=23.42+5

#		would generate images named like this:

#			gluon-ff%site_code%-23.42+5-%router_model%.bin

# Allow overriding the release number from the command line

GLUON_RELEASE ?= $(DEFAULT_GLUON_RELEASE)

# Default priority for updates.

GLUON_PRIORITY ?= 0

# Firmware branch and autoupdater config

GLUON_AUTOUPDATER_BRANCH ?= experimental

GLUON_AUTOUPDATER_ENABLED ?= 1

# set mesh mode for ath10k to 802.11s

GLUON_ATH10K_MESH ?= 11s

# Languages to include

GLUON_LANGS ?= de en

# define a region for specific devices like TP-Link Archer C7

GLUON_REGION := eu

USB_X86_GENERIC_NETWORK_MODULES := \

		kmod-usb-ohci-pci \

		kmod-sky2 \

		kmod-atl2 \

		kmod-igb \

		kmod-3c59x \

		kmod-e100 \

		kmod-e1000 \

		kmod-e1000e \

		kmod-natsemi \

		kmod-ne2k-pci \

		kmod-pcnet32 \

		kmod-8139too \

		kmod-r8169 \

		kmod-sis900 \

		kmod-tg3 \

		kmod-via-rhine \

		kmod-via-velocity \

		kmod-forcedeth \

		kmod-iwlwifi

ifeq ($(GLUON_TARGET),x86-generic)

		GLUON_SITE_PACKAGES += \

	$(USB_X86_GENERIC_NETWORK_MODULES)

endif

ifeq ($(GLUON_TARGET),x86-64)

              GLUON_SITE_PACKAGES += \

       $(USB_X86_GENERIC_NETWORK_MODULES)

endif

# Do not build images for deprecated devices

GLUON_DEPRECATED ?= 0

-- This is an example site configuration for Gluon v2014.3.x

--

-- Take a look at the documentation located at

-- http://gluon.readthedocs.org/ for details.

--

-- This configuration will not work as it. You're required to make

-- community specific changes to it!

{

  -- Used for generated hostnames, e.g. freifunk-abcdef123456.

  hostname_prefix = 'fflux-',

  -- Name of the community.

  site_name = 'Freifunk Luxembourg',

  -- Shorthand of the community.

  site_code = 'fflux',

  -- 32 bytes of random data, encoded in hexadecimal

  -- This data must be unique among all sites and domains!

  -- Can be generated using: echo $(hexdump -v -n 32 -e '1/1 "%02x"' </dev/urandom)

  domain_seed = '20d0d9c09a27d488c1291da65fe4dd4971ff8631dba0195be15805dbad01f78e',

  -- Prefixes used within the mesh. Both are required.

  prefix4 = '10.24.128.0/18',

  prefix6 = 'fd4e:f2d7:88d2:fffe::/64',

  -- Timezone of your community.

  -- See http://wiki.openwrt.org/doc/uci/system#time.zones

  timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',

  -- List of NTP servers in your community.

  -- Must be reachable using IPv6!

  -- Wireless regulatory domain of your community.

  regdom = 'LU',

  -- Wireless configuratoin for 2.4 GHz interfaces.

  wifi24 = {

    -- Wireless channel.

    channel = 1,

	ap = {

	  ssid = 'luxembourg.freifunk.net',

	},

	mesh = {

	  id = 'freifunk-mesh',

	  mcast_rate = 12000,

	},

  },

  -- Wireless configuration for 5 GHz interfaces.

  -- This should be equal to the 2.4 GHz variant, except

  -- for channel and htmode.

  wifi5 = {

    channel = 36;

	ap = {

	  ssid = 'luxembourg.freifunk.net',

	},

	mesh = {

	  id = 'freifunk-mesh',

	  mcast_rate = 12000,

	},

  },

  mesh = {

    vxlan = true,

    batman_adv = {

      routing_algo = 'BATMAN_IV',

     },

   },

  -- The next node feature allows clients to always reach the node it is

  -- connected to using a known IP address.

  next_node = {

    -- anycast IPs of all nodes

    ip4 = '10.24.128.1',

    ip6 = 'fd4e:f2d7:88d2:fffe::1',

    -- anycast MAC of all nodes

    mac = '32:3d:f9:8f:01:53',

  },

  -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand

  -- what these options do.

  mesh_vpn = {

    enabled = true,

    mtu = 1406,

   fastd = {

    configurable = true,

    -- List of crypto-methods to use.

    methods = {'salsa2012+umac'},

    groups = {

      backbone = {

        -- Limit number of connected peers to reduce bandwidth.

        limit = 1,

        -- List of peers.

        peers = {

        },

      },

    },

   },

  },

  autoupdater = {

    enabled = true,

    -- Default branch. Don't forget to set GLUON_BRANCH when building!

    branch = 'stable',

    -- List of branches. You may define multiple branches.

    branches = {

      stable = {

        name = 'stable',

        -- List of mirrors to fetch images from. IPv6 required!

        mirrors = {

	        'http://[fd4e:f2d7:88d2:fffe::11]/stable/sysupgrade',

                'http://[fd4e:f2d7:88d2:fffe::12]/stable/sysupgrade',

	        'http://firmware.freifunk.lu/stable/sysupgrade',

        },

        -- Number of good signatures required.

        -- Have multiple maintainers sign your build and only

        -- accept it when a sufficient number of them have

        -- signed it.

        good_signatures = 1,

        -- List of public keys of maintainers.

        pubkeys = {

            '22e564fd31849637738ab5881469ea51cd4afd181c444244eb8a8ee04df40fef', -- orimpe

	    '45c0d4a3d60c03f81ea75dd887474d99b29cd541f30807465e01de6c1b721b54', -- xbr

            '0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgamer

            '6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fantawams

        },

      },

      beta = {

        name = 'beta',

        -- List of mirrors to fetch images from. IPv6 required!

        mirrors = {

        },

        -- Number of good signatures required.

        -- Have multiple maintainers sign your build and only

        -- accept it when a sufficient number of them have

        -- signed it.

        good_signatures = 1,

        -- List of public keys of maintainers.

        pubkeys = {

            '22e564fd31849637738ab5881469ea51cd4afd181c444244eb8a8ee04df40fef', -- orimpe

            '45c0d4a3d60c03f81ea75dd887474d99b29cd541f30807465e01de6c1b721b54', -- xbr

            '0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgamer

            '6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fantawams

        },

      },

      experimental = {

        name = 'experimental',

        -- List of mirrors to fetch images from. IPv6 required!

        mirrors = {

        },

        -- Number of good signatures required.

        -- Have multiple maintainers sign your build and only

        -- accept it when a sufficient number of them have

        -- signed it.

        good_signatures = 1,

        -- List of public keys of maintainers.

        pubkeys = {

            '22e564fd31849637738ab5881469ea51cd4afd181c444244eb8a8ee04df40fef', -- orimpe

            '45c0d4a3d60c03f81ea75dd887474d99b29cd541f30807465e01de6c1b721b54', -- xbr

            '0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgamer

            '6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fantawams

        },

      },

    },

  },

  bandwidth_limit = {

      -- The bandwidth limit can be enabled by default here.

      enabled = false,

      -- Default upload limit (kbit/s).

      egress = 200,

      -- Default download limit (kbit/s).

      ingress = 3000,

    },

  ssid_changer = {

  switch_timeframe = 5,  -- only once every timeframe (in minutes) the SSID will change to the Offline-SSID

                          -- set to 1440 to change once a day

                          -- set to 1 minute to change every time the router gets offline

  first = 5,              -- the first few minutes directly after reboot within which an Offline-SSID always may be activated (must be <= switch_timeframe)

  prefix = 'FF_Offline_', -- use something short to leave space for the nodename (no '~' allowed!)

  suffix = 'nodename',    -- generate the SSID with either 'nodename', 'mac' or to use only the prefix: 'none'

  tq_limit_enabled = false,   -- if false, the offline SSID will only be set if there is no gateway reacheable

                          -- upper and lower limit to turn the offline_ssid on and off

                          -- in-between these two values the SSID will never be changed to prevent it from toggeling every minute.

  tq_limit_max = '45',    -- upper limit, above that the online SSID will be used

  tq_limit_min = '30'     -- lower limit, below that the offline SSID will be used

},

}

##	gluon site.mk makefile example

##      GLUON_FEATURES

#               Specify Gluon features/packages to enable;

#               Gluon will automatically enable a set of packages

#               depending on the combination of features listed

GLUON_FEATURES := \

        autoupdater \

        ebtables-filter-multicast \

        ebtables-filter-ra-dhcp \

        ebtables-limit-arp \

        mesh-batman-adv-15 \

        mesh-vpn-fastd \

        respondd \

        status-page \

        web-advanced \

	wireless-encryption-wpa3 \

        web-wizard

##	GLUON_SITE_PACKAGES

#		specify gluon/openwrt packages to include here

#               The gluon-mesh-batman-adv-* package must come first because of the dependency resolution

GLUON_SITE_PACKAGES := \

		gluon-mesh-batman-adv-15 \

		gluon-autoupdater \

		gluon-config-mode-autoupdater \

		gluon-config-mode-hostname \

		gluon-config-mode-mesh-vpn \

		gluon-config-mode-geo-location \

		gluon-config-mode-contact-info \

		gluon-config-mode-core \

		gluon-ebtables-filter-multicast \

		gluon-ebtables-filter-ra-dhcp \

		gluon-web-admin \

		gluon-web-autoupdater \

		gluon-web-wifi-config \

		gluon-web-private-wifi \

		gluon-mesh-vpn-fastd \

		gluon-radvd \

		gluon-respondd \

	        gluon-setup-mode \

		gluon-status-page \

		gluon-ssid-changer \

		respondd-module-airtime \

		iwinfo \

		iptables \

##	DEFAULT_GLUON_RELEASE

#		version string to use for images

#		gluon relies on

#			opkg compare-versions "$1" '>>' "$2"

#		to decide if a version is newer or not.

#DEFAULT_GLUON_RELEASE := sid~exp$(shell date '+%Y%m%d')

##	GLUON_RELEASE

#		call make with custom GLUON_RELEASE flag, to use your own release version scheme.

#		e.g.:

#			$ make images GLUON_RELEASE=23.42+5

#		would generate images named like this:

#			gluon-ff%site_code%-23.42+5-%router_model%.bin

# Allow overriding the release number from the command line

GLUON_RELEASE ?= $(DEFAULT_GLUON_RELEASE)

# Default priority for updates.

GLUON_PRIORITY ?= 0

# set mesh mode for ath10k to 802.11s

GLUON_ATH10K_MESH ?= 11s

# Languages to include

GLUON_REGION := eu

USB_X86_GENERIC_NETWORK_MODULES := \

		kmod-usb-ohci-pci \

		kmod-sky2 \

		kmod-atl2 \

		kmod-igb \

		kmod-3c59x \

		kmod-e100 \

		kmod-e1000 \

		kmod-e1000e \

		kmod-natsemi \

		kmod-ne2k-pci \

		kmod-pcnet32 \

		kmod-8139too \

		kmod-r8169 \

		kmod-sis900 \

		kmod-tg3 \

		kmod-via-rhine \

		kmod-via-velocity \

		kmod-forcedeth \

		kmod-iwlwifi

ifeq ($(GLUON_TARGET),x86-generic)

		GLUON_SITE_PACKAGES += \

	$(USB_X86_GENERIC_NETWORK_MODULES)

endif

ifeq ($(GLUON_TARGET),x86-64)

              GLUON_SITE_PACKAGES += \

       $(USB_X86_GENERIC_NETWORK_MODULES)

endif

# Do not build images for deprecated devices

GLUON_DEPRECATED ?= 0