freifunk/Firmware-building Changeset - a93435bb93c8 · Chaos Computer Club Lëtzebuerg Projects

Changeset - a93435bb93c8

Parent rev.

Child rev.

[Not reviewed]

0 1 0

x - 1 month ago 2025-09-13 00:21:36
xbr@c3l.lu

style: restructure experimental site.conf

This commit does not change any data within the site config, instead it
focuses on the structure of the site.conf.

This commit was long overdue, if anything, it is not extreme ennough,
and we should remove all comments.

1 file changed with 24 insertions and 44 deletions:

site_config/experimental/site/site.conf

0 comments (0 inline, 0 general)

site_config/experimental/site/site.conf

➞

Show inline comments

 -- This is an example site configuration for Gluon v2014.3.x
 --
 -- Take a look at the documentation located at
 -- http://gluon.readthedocs.org/ for details.
 --
 -- This configuration will not work as it. You're required to make
 -- community specific changes to it!
 -- See https://gluon.readthedocs.io/
+{
-  -- Used for generated hostnames, e.g. freifunk-abcdef123456.
+	-- Used for generated hostnames, e.g. freifunk-abcdef123456. (optional)
 	hostname_prefix = 'fflux-',
 	-- Name of the community.
 	site_name = 'Freifunk Luxembourg',
 	-- Shorthand of the community.
 	site_code = 'fflux',
 	-- 32 bytes of random data, encoded in hexadecimal
 	-- This data must be unique among all sites and domains!
 	-- Can be generated using: echo $(hexdump -v -n 32 -e '1/1 "%02x"' </dev/urandom)
 	domain_seed = '20d0d9c09a27d488c1291da65fe4dd4971ff8631dba0195be15805dbad01f78e',
   -- Prefixes used within the mesh. Both are required.
 	-- Prefixes used within the mesh.
 	-- prefix6 is required, prefix4 can be omitted if next_node.ip4 is not set.
 	prefix4 = '10.24.128.0/18',
 	prefix6 = 'fd4e:f2d7:88d2:fffe::/64',
 	-- Timezone of your community.
-  -- See http://wiki.openwrt.org/doc/uci/system#time.zones
+	-- See https://openwrt.org/docs/guide-user/base-system/system_configuration#time_zones
 	timezone = 'CET-1CEST,M3.5.0,M10.5.0/3',
 	-- List of NTP servers in your community.
 	-- Must be reachable using IPv6!
 	ntp_servers = {'fd4e:f2d7:88d2:fffe::11','fd4e:f2d7:88d2:fffe::12','fd4e:f2d7:88d2:fffe::19'},
 	-- Wireless regulatory domain of your community.
 	regdom = 'LU',
 	-- Wireless configuratoin for 2.4 GHz interfaces.
 	wifi24 = {
 		-- Wireless channel.
 		channel = 1,
 		ap = {
 			ssid = 'luxembourg.freifunk.net',
 		},
 		mesh = {
 			-- usually you don't want users to connect to this mesh-SSID,
 			-- so use a cryptic id that no one will accidentally mistake for the client WiFi
 			id = 'freifunk-mesh',
 			mcast_rate = 12000,
 		},
 	},
 	-- Wireless configuration for 5 GHz interfaces.
 	-- This should be equal to the 2.4 GHz variant, except
 	-- for channel and htmode.
 	wifi5 = {
 		channel = 36;
 		ap = {
 			ssid = 'luxembourg.freifunk.net',
 		},
 		mesh = {
 			id = 'freifunk-mesh',
 			mcast_rate = 12000,
 		},
 	},
 	mesh = {
 		vxlan = true,
 		batman_adv = {
@@ @@ -74,155 +71,138 @@ @@
 	-- The next node feature allows clients to always reach the node it is
 	-- connected to using a known IP address.
 	next_node = {
 		-- anycast IPs of all nodes
 		ip4 = '10.24.128.1',
 		ip6 = 'fd4e:f2d7:88d2:fffe::1',
 		-- anycast MAC of all nodes
 		mac = '32:3d:f9:8f:01:53',
 	},
   -- Refer to http://fastd.readthedocs.org/en/latest/ to better understand
   -- what these options do.
 	mesh_vpn = {
 		enabled = true,
 		fastd = {
     mtu = 1406,
     configurable = true,
 			-- Refer to https://fastd.readthedocs.io/en/latest/ to better understand
 			-- what these options do.
 			-- List of crypto-methods to use.
 			methods = {'salsa2012+umac'},
 			mtu = 1406,
 			configurable = true,
 			groups = {
 				backbone = {
 					-- Limit number of connected peers to reduce bandwidth.
 					limit = 1,
 					-- List of peers.
 					peers = {
 						gw1 = {
 							key = 'd5af753220451b6c181cca469835da9c67d3ca9603465e13a5adb9b64f89f3c6',
 							remotes = {'ipv4 "fflux-gw1.freifunk.lu" port 10000'},
 						},
 						gw2 = {
 							key = '3c42a77d863cb0475ec5a9e9b9c63ff557f8bac991b78a26427f100cc130462b',
 							remotes = {'ipv4 "fflux-gw2.freifunk.lu" port 10000'},
 						},
 						test = {
 							key = '95b22943135927cc1da6800ba152819ae5ee26cbb83d6354bc81a5ce632fcb5a',
 							remotes = {'ipv4 "fflux-test.freifunk.lu" port 10000'},
 						},
 					},
 				},
 			},
 		},
 		bandwidth_limit = {
 			-- preset can be enabled by default here
 			enabled = false,
 			-- in kbit/s
 			egress = 2560, -- 2 Mbit/
 			ingress = 10240, -- 10 Mbit/s
 		},
 	},
 	autoupdater = {
 		-- Set GLUON_AUTOUPDATER_ENABLED to enable the autoupdater by default for newly installed nodes.
 		enabled = true,
-    -- Default branch. Don't forget to set GLUON_BRANCH when building!
+		-- Default branch (optional), can be overridden by setting GLUON_AUTOUPDATER_BRANCH when building.
 		branch = 'stable',
     -- List of branches. You may define multiple branches.
 		branches = {
 			stable = {
 				name = 'stable',
 				-- List of mirrors to fetch images from. IPv6 required!
 				mirrors = {
 					'http://[fd4e:f2d7:88d2:fffe::11]/stable/sysupgrade',
 					'http://[fd4e:f2d7:88d2:fffe::12]/stable/sysupgrade',
 					'http://[fd4e:f2d7:88d2:fffe::19]/stable/sysupgrade',
 					'http://firmware.freifunk.lu/stable/sysupgrade',
 				},
         -- Number of good signatures required.
         -- Have multiple maintainers sign your build and only
         -- accept it when a sufficient number of them have
         -- signed it.
 				good_signatures = 1,
         -- List of public keys of maintainers.
 				pubkeys = {
 						'22e564fd31849637738ab5881469ea51cd4afd181c444244eb8a8ee04df40fef', -- orimpe
 						'45c0d4a3d60c03f81ea75dd887474d99b29cd541f30807465e01de6c1b721b54', -- xbr
 						'0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgamer
 						'6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fantawams
 				},
 			},
 			beta = {
 				name = 'beta',
 				-- List of mirrors to fetch images from. IPv6 required!
 				mirrors = {
 					'http://[fd4e:f2d7:88d2:fffe::11]/beta/sysupgrade',
 					'http://[fd4e:f2d7:88d2:fffe::12]/beta/sysupgrade',
 					'http://[fd4e:f2d7:88d2:fffe::19]/beta/sysupgrade',
 					'http://firmware.freifunk.lu/beta/sysupgrade',
 				},
         -- Number of good signatures required.
         -- Have multiple maintainers sign your build and only
         -- accept it when a sufficient number of them have
         -- signed it.
 				good_signatures = 1,
         -- List of public keys of maintainers.
 				pubkeys = {
 					'22e564fd31849637738ab5881469ea51cd4afd181c444244eb8a8ee04df40fef', -- orimpe
 					'45c0d4a3d60c03f81ea75dd887474d99b29cd541f30807465e01de6c1b721b54', -- xbr
 					'0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgamer
 					'6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fantawams
 				},
 			},
 			experimental = {
 				name = 'experimental',
 				-- List of mirrors to fetch images from. IPv6 required!
 				mirrors = {
 					'http://[fd4e:f2d7:88d2:fffe::11]/experimental/sysupgrade',
 					'http://[fd4e:f2d7:88d2:fffe::12]/experimental/sysupgrade',
 					'http://[fd4e:f2d7:88d2:fffe::19]/experimental/sysupgrade',
 					'http://firmware.freifunk.lu/experimental/sysupgrade',
 				},
         -- Number of good signatures required.
         -- Have multiple maintainers sign your build and only
         -- accept it when a sufficient number of them have
         -- signed it.
 				good_signatures = 1,
         -- List of public keys of maintainers.
 				pubkeys = {
 						'22e564fd31849637738ab5881469ea51cd4afd181c444244eb8a8ee04df40fef', -- orimpe
 						'45c0d4a3d60c03f81ea75dd887474d99b29cd541f30807465e01de6c1b721b54', -- xbr
 						'0e6c109a94d062fb5d03c49d42a7e13db5a5c6f7639922e4da38d30026ee7164', -- metalgamer
 						'6e70a4bff82d70bb4f7d19ab170bf9f9aee64181567fefee040995fb9e5c1547' -- fantawams
 				},
 			},
     },
 		},
   bandwidth_limit = {
       -- The bandwidth limit can be enabled by default here.
       enabled = false,
       -- Default upload limit (kbit/s).
       egress = 200,
       -- Default download limit (kbit/s).
       ingress = 3000,
 	},
 	ssid_changer = {
 		switch_timeframe = 5,  -- only once every timeframe (in minutes) the SSID will change to the Offline-SSID
 									-- set to 1440 to change once a day
 									-- set to 1 minute to change every time the router gets offline
 		first = 5,              -- the first few minutes directly after reboot within which an Offline-SSID always may be activated (must be <= switch_timeframe)
 		prefix = 'FF_Offline_', -- use something short to leave space for the nodename (no '~' allowed!)
 		suffix = 'nodename',    -- generate the SSID with either 'nodename', 'mac' or to use only the prefix: 'none'
 		tq_limit_enabled = false,   -- if false, the offline SSID will only be set if there is no gateway reacheable
 											-- upper and lower limit to turn the offline_ssid on and off

0 comments (0 inline, 0 general)