freifunk/Firmware-building Changeset - c663aeea25a2 · Chaos Computer Club Lëtzebuerg Projects

Changeset - c663aeea25a2

Parent rev.

Child rev.

[Not reviewed]

0 1 1

x - 13 hours ago 2025-08-23 01:47:09
xbr@c3l.lu

experimental: v2023.2.5 for 2025_08_22

This update required bigger changes: moving information from "site.mk"
to a new file called "image-customization.lua".

I do not like the x86-specific packages, but I kept them as nobody told
me if they were needed or not.

2 files changed with 68 insertions and 83 deletions:

site_config/experimental/site/image-customization.lua

site_config/experimental/site/site.mk

0 comments (0 inline, 0 general)

site_config/experimental/site/image-customization.lua

➞

Show inline comments

@@ new file 100644 @@
 features {
     'autoupdater',
     'ebtables-filter-multicast',
     'ebtables-filter-ra-dhcp',
     'ebtables-limit-arp',
     'mesh-batman-adv-15',
     'mesh-vpn-fastd',
     'respondd',
     'status-page',
     'web-advanced',
     'wireless-encryption-wpa3',
     'web-wizard',
+}
 packages {
     'gluon-mesh-batman-adv-15',
     'gluon-autoupdater',
     'gluon-config-mode-autoupdater',
     'gluon-config-mode-hostname',
     'gluon-config-mode-mesh-vpn',
     'gluon-config-mode-geo-location',
     'gluon-config-mode-contact-info',
     'gluon-config-mode-core',
     'gluon-ebtables-filter-multicast',
     'gluon-ebtables-filter-ra-dhcp',
     'gluon-web-admin',
     'gluon-web-autoupdater',
     'gluon-web-wifi-config',
     'gluon-web-private-wifi',
     'gluon-mesh-vpn-fastd',
     'gluon-radvd',
     'gluon-respondd',
     'gluon-setup-mode',
     'gluon-status-page',
     'gluon-ssid-changer',
     'respondd-module-airtime',
     'iwinfo',
+}
 -- this is legacy and was ported over from the previous file
 -- unsure if needed or has any use
 usb_x86_generic_network_modules = {
     'kmod-usb-ohci-pci',
     'kmod-sky2',
     'kmod-atl2',
     'kmod-igb',
     'kmod-3c59x',
     'kmod-e100',
     'kmod-e1000',
     'kmod-e1000e',
     'kmod-natsemi',
     'kmod-ne2k-pci',
     'kmod-pcnet32',
     'kmod-8139too',
     'kmod-r8169',
     'kmod-sis900',
     'kmod-tg3',
     'kmod-via-rhine',
     'kmod-via-velocity',
     'kmod-forcedeth',
     'kmod-iwlwifi',
+}
 if target('x86', '64') or target('x86', 'generic') then
     packages(usb_x86_generic_network_modules)
 end

site_config/experimental/site/site.mk

➞

Show inline comments

 ##	gluon site.mk makefile example
 ##      GLUON_FEATURES
 #               Specify Gluon features/packages to enable;
 #               Gluon will automatically enable a set of packages
 #               depending on the combination of features listed
 GLUON_FEATURES := \
         autoupdater \
         ebtables-filter-multicast \
         ebtables-filter-ra-dhcp \
         ebtables-limit-arp \
         mesh-batman-adv-15 \
         mesh-vpn-fastd \
         respondd \
         status-page \
         web-advanced \
 	wireless-encryption-wpa3 \
         web-wizard
 ##	GLUON_SITE_PACKAGES
 #		specify gluon/openwrt packages to include here
 #               The gluon-mesh-batman-adv-* package must come first because of the dependency resolution
 GLUON_SITE_PACKAGES := \
 		gluon-mesh-batman-adv-15 \
 		gluon-autoupdater \
 		gluon-config-mode-autoupdater \
 		gluon-config-mode-hostname \
 		gluon-config-mode-mesh-vpn \
 		gluon-config-mode-geo-location \
 		gluon-config-mode-contact-info \
 		gluon-config-mode-core \
 		gluon-ebtables-filter-multicast \
 		gluon-ebtables-filter-ra-dhcp \
 		gluon-web-admin \
 		gluon-web-autoupdater \
 		gluon-web-wifi-config \
 		gluon-web-private-wifi \
 		gluon-mesh-vpn-fastd \
 		gluon-radvd \
 		gluon-respondd \
 	        gluon-setup-mode \
 		gluon-status-page \
 		gluon-ssid-changer \
 		respondd-module-airtime \
 		iwinfo \
 		# freifunk-gluon/gluon #2046 - Builds fail with iptables in GLUON_SITE_PACKAGES
 		# Note that iptables is an OpenWrt core package that is included by default (which is what triggered this bug).
 		#iptables \
 ##	DEFAULT_GLUON_RELEASE
 #		version string to use for images
 #		gluon relies on
@@ @@ -58,7 +7,7 @@ GLUON_SITE_PACKAGES := \ @@
 #		to decide if a version is newer or not.
 #DEFAULT_GLUON_RELEASE := sid~exp$(shell date '+%Y%m%d')
 # Naming after gluon: v2023.1 = 2023.1.0, as they might release v2023.1.1 = 2023.1.1
-DEFAULT_GLUON_RELEASE := 2023.1.2.0~exp20250107
+DEFAULT_GLUON_RELEASE := 2023.2.5.0~exp20250822
 ##	GLUON_RELEASE
@@ @@ -88,36 +37,5 @@ GLUON_LANGS ?= de en @@
 # define a region for specific devices like TP-Link Archer C7
 GLUON_REGION := eu
 USB_X86_GENERIC_NETWORK_MODULES := \
 		kmod-usb-ohci-pci \
 		kmod-sky2 \
 		kmod-atl2 \
 		kmod-igb \
 		kmod-3c59x \
 		kmod-e100 \
 		kmod-e1000 \
 		kmod-e1000e \
 		kmod-natsemi \
 		kmod-ne2k-pci \
 		kmod-pcnet32 \
 		kmod-8139too \
 		kmod-r8169 \
 		kmod-sis900 \
 		kmod-tg3 \
 		kmod-via-rhine \
 		kmod-via-velocity \
 		kmod-forcedeth \
 		kmod-iwlwifi
 ifeq ($(GLUON_TARGET),x86-generic)
 		GLUON_SITE_PACKAGES += \
 	$(USB_X86_GENERIC_NETWORK_MODULES)
 endif
 ifeq ($(GLUON_TARGET),x86-64)
               GLUON_SITE_PACKAGES += \
        $(USB_X86_GENERIC_NETWORK_MODULES)
 endif
 # Do not build images for deprecated devices
 GLUON_DEPRECATED ?= 0

0 comments (0 inline, 0 general)