##	gluon site.mk makefile example

##      GLUON_FEATURES

#               Specify Gluon features/packages to enable;

#               Gluon will automatically enable a set of packages

#               depending on the combination of features listed

GLUON_FEATURES := \

        autoupdater \

        ebtables-filter-multicast \

        ebtables-filter-ra-dhcp \

        ebtables-limit-arp \

        mesh-batman-adv-15 \

        mesh-vpn-fastd \

        respondd \

        status-page \

        web-advanced \

	wireless-encryption-wpa3 \

        web-wizard

##	GLUON_SITE_PACKAGES

#		specify gluon/openwrt packages to include here

#               The gluon-mesh-batman-adv-* package must come first because of the dependency resolution

GLUON_SITE_PACKAGES := \

		gluon-mesh-batman-adv-15 \

		gluon-autoupdater \

		gluon-config-mode-autoupdater \

		gluon-config-mode-hostname \

		gluon-config-mode-mesh-vpn \

		gluon-config-mode-geo-location \

		gluon-config-mode-contact-info \

		gluon-config-mode-core \

		gluon-ebtables-filter-multicast \

		gluon-ebtables-filter-ra-dhcp \

		gluon-web-admin \

		gluon-web-autoupdater \

		gluon-web-wifi-config \

		gluon-web-private-wifi \

		gluon-mesh-vpn-fastd \

		gluon-radvd \

		gluon-respondd \

	        gluon-setup-mode \

		gluon-status-page \

		gluon-ssid-changer \

		respondd-module-airtime \

		iwinfo \

		#iptables \

##	DEFAULT_GLUON_RELEASE

#		version string to use for images

#		gluon relies on

#			opkg compare-versions "$1" '>>' "$2"

#		to decide if a version is newer or not.

#DEFAULT_GLUON_RELEASE := sid~exp$(shell date '+%Y%m%d')

# Naming after gluon: v2023.1 = 2023.1.0, as they might release v2023.1.1 = 2023.1.1

DEFAULT_GLUON_RELEASE := 2023.1.0.0~exp20240603

##	GLUON_RELEASE

#		call make with custom GLUON_RELEASE flag, to use your own release version scheme.

#		e.g.:

#			$ make images GLUON_RELEASE=23.42+5

#		would generate images named like this:

#			gluon-ff%site_code%-23.42+5-%router_model%.bin

# Allow overriding the release number from the command line

GLUON_RELEASE ?= $(DEFAULT_GLUON_RELEASE)

# Default priority for updates.

GLUON_PRIORITY ?= 0

# Firmware branch and autoupdater config

GLUON_AUTOUPDATER_BRANCH ?= experimental

GLUON_AUTOUPDATER_ENABLED ?= 1

# set mesh mode for ath10k to 802.11s

GLUON_ATH10K_MESH ?= 11s

# Languages to include

GLUON_LANGS ?= de en

# define a region for specific devices like TP-Link Archer C7

GLUON_REGION := eu

USB_X86_GENERIC_NETWORK_MODULES := \

		kmod-usb-ohci-pci \

		kmod-sky2 \

		kmod-atl2 \

		kmod-igb \

		kmod-3c59x \

		kmod-e100 \

		kmod-e1000 \

		kmod-e1000e \

		kmod-natsemi \

		kmod-ne2k-pci \

		kmod-pcnet32 \

		kmod-8139too \

		kmod-r8169 \

		kmod-sis900 \

		kmod-tg3 \

		kmod-via-rhine \

		kmod-via-velocity \

		kmod-forcedeth \

		kmod-iwlwifi

ifeq ($(GLUON_TARGET),x86-generic)

		GLUON_SITE_PACKAGES += \

	$(USB_X86_GENERIC_NETWORK_MODULES)

endif

ifeq ($(GLUON_TARGET),x86-64)

              GLUON_SITE_PACKAGES += \

       $(USB_X86_GENERIC_NETWORK_MODULES)

endif

# Do not build images for deprecated devices

GLUON_DEPRECATED ?= 0